Welcome, Guest
Username: Password: Remember me
"City Car Driving" general discussion forum for English users
  • Page:
  • 1

TOPIC: AUtomatic gear selection problem

AUtomatic gear selection problem 11 Feb 2012 08:25 #2216

  • donk
  • donk's Avatar
  • OFFLINE
  • Novice
  • Posts: 4
Hi,
I am now using the Logitech Driving force GT wheel,I have all functions assigned that I need however
I cannot get the reverse to work. I am using the car with automatic transmission and have auto clutch selected.
Any help would be appreciated!
thanks,
Don
The administrator has disabled public write access.

Re: AUtomatic gear selection problem 12 Feb 2012 23:00 #2228

  • merlin
  • merlin's Avatar
  • OFFLINE
  • Novice
  • Posts: 4
Hello,

I have Logitech G25 wheel and I found out, that settings for automatic transmission in this game is pretty much hardly confused. Yesterday after spending about 2 hours of trying different combination I found out one, which I can use with my gear lever.

1) G25 gear lever can be set into two modes = manual (6+1 gear) and automatic (forward/backward + reverse). That mode for automatic transmission is probably unusable for this game - even for driving car with automatic transmission I must have gear lever in manual mode.

2) In game setting names are probably mixed up for automatic tranmission. This is configuration, which finally worked for me:

ingame setting = button number (real position on G25 gear lever in manual mode)
1. gear = button 12 (4. gear)
2. gear = button 10 (2. gear)
3. gear = button 15 (reverse)
4. gear = button 14 (6. gear)
5. gear = nothing
6. gear = button 13 (5. gear)
Neutral gear = button 9 (1. gear)
Reverse = button 11 (3. gear)

This way I have:
R = 1. gear position on G25 gear lever in manual mode
D = 2. gear -//-
P = 3. gear -//-
N = 4. gear -//-
1 = 5. gear -//-
2 = 6. gear -//-
3 = reverse -//-

And with this setting I can finally drive cars with automatic transmissio in CCD 1.2.2.

May be some game developer should look into this :whistle: ;)
Last Edit: 12 Feb 2012 23:01 by merlin.
The administrator has disabled public write access.

Re: AUtomatic gear selection problem 13 Feb 2012 03:39 #2230

I set up the paddles on the steering wheel for "Shift Up" and "Shift Down" functions. They can be used for automatic transmission gear selection. I have Logitech G27 wheel. I wish that Logitech offers an automatic transmission gear lever unit and parking brake lever unit for G25 and G27 wheels.
The administrator has disabled public write access.

Re: AUtomatic gear selection problem 13 Feb 2012 16:57 #2238

  • Kivlov
  • Kivlov's Avatar
donk wrote:
Hi,
I am now using the Logitech Driving force GT wheel,I have all functions assigned that I need however
I cannot get the reverse to work. I am using the car with automatic transmission and have auto clutch selected.
Any help would be appreciated!
thanks,
Don
Manual transmission with auto-clutch and automatic transmisison - are not the same things!
If you use a fully automatic transmission - option "auto-cluth" is no matter for you. And in this case you should notice, that you can change gear modes only while pressing the brake pedal. Reverse can be turned on only when the car is fully stopped and brake is pressed.
The administrator has disabled public write access.

Re: AUtomatic gear selection problem 13 Feb 2012 17:01 #2239

  • Kivlov
  • Kivlov's Avatar
merlin wrote:
Hello,

I have Logitech G25 wheel and I found out, that settings for automatic transmission in this game is pretty much hardly confused. Yesterday after spending about 2 hours of trying different combination I found out one, which I can use with my gear lever.

1) G25 gear lever can be set into two modes = manual (6+1 gear) and automatic (forward/backward + reverse). That mode for automatic transmission is probably unusable for this game - even for driving car with automatic transmission I must have gear lever in manual mode.

2) In game setting names are probably mixed up for automatic tranmission. This is configuration, which finally worked for me:

ingame setting = button number (real position on G25 gear lever in manual mode)
1. gear = button 12 (4. gear)
2. gear = button 10 (2. gear)
3. gear = button 15 (reverse)
4. gear = button 14 (6. gear)
5. gear = nothing
6. gear = button 13 (5. gear)
Neutral gear = button 9 (1. gear)
Reverse = button 11 (3. gear)

This way I have:
R = 1. gear position on G25 gear lever in manual mode
D = 2. gear -//-
P = 3. gear -//-
N = 4. gear -//-
1 = 5. gear -//-
2 = 6. gear -//-
3 = reverse -//-

And with this setting I can finally drive cars with automatic transmissio in CCD 1.2.2.

May be some game developer should look into this :whistle: ;)
1. This mode of G25 us usable for the game, but it allows you only change gears up and down (inlcuding the automatic transmission). But you should notice that in case of automatic transmission you need turn off the option "Hold the gear buttun pressed (for G25/G27 wheels)". This option is only for manual gear mode.
The administrator has disabled public write access.

Re: AUtomatic gear selection problem 05 Mar 2012 22:28 #2402

I'm updating the topic here. I have the Driving Force GT too, and I cant put the reverse, or drive on the automatic transmission. My buttons work, and of course, I'm parked and I press the brake pedal (and the pedal works too).

-Chris
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 0.230 seconds